Barco BarcoReality 909 Split Pack R9040040, Owner'S Manual

Page: 83 / 111

7. Service Mode
3. Push the ↑ or ↓ keys to highlight ABL: Continues .
ABL CONTROLLER
ABL: CONTINUES
(ABL lines)
ABL TIMER : 0 hours
Set ABL timer to zero
to disable the timer.
Timer only active in
FORCED mode.
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-24
4. Press ENTER to toggle between the ABL modes:
Continues The ABL is measured in sync with the vertical refresh rate of the projected image
Forced ABL is measured according to the ABL timer setting
How to set the ABL Timer?
The ABL Timer is only active in ’Forced’ mode
1. Push the
↑ or ↓ keys to highlight ABL Timer .
ABL CONTROLLER
ABL: FORCED
(no ABL lines)
ABL TIMER : 0 hours
Set ABL timer to zero
to disable the timer.
Timer only active in
FORCED mode.
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-25
2. Press ENTER to select.
The ABL Timer menu will be displayed.
3. Push the ← , → and numeric keys to set the ABL Timer.
ABL CONTROLLER
Enter new time :
0 0 1 hours
Use
←
and
→
to select,
and reprogram
with numeric keys.
<ENTER> to confirm
<EXIT> to return
Menu 7-26
Note: ABL can also be controlled by a PC through RS232, in this case the ABL Timer is disabled by setting the ABL timer to
zero.
4. Press ENTER to confirm.
5. Press EXIT to return to the ABL Controller menu.
6. Press EXIT to return to the Service Mode menu.
R5976398 BARCOREALITY 909 SPLIT PACK 21/02/2003 79