Barco BarcoReality 908, Installation Manual

Page: 41 / 74

6. Source Connections
6. SOURCE CONNECTIONS
Overview
• Input Locations
• Composite Video Source to Port 1
• S-Video or Video Source to Port 2
• RGB Analog Source to Port 3
• RGB Analog Source with Composite Sync to Port 4/5
• Component Video Source to Port 4/5
• RGB Analog Source with Tri Level Sync to Port 4/5 (Optional)
• Component Video Source with Tri Level Sync to Port 4/5 (Optional)
• RS232 Connection
• Communication Port for Communication With Peripherals
6.1 Input Locations
Input Facilities
• Composite Video
1
• S-Video
1
• RGBS or RG
S
B
• RGB3S or RG
3S
B
• (R-Y)Y(B-Y)S or (R-Y)Y
S
(B-Y) [Component Input]
• (R-Y)Y(B-Y)3S or (R-Y)Y
3S
(B-Y) [Component Input]
Image 6-1
Input Facilities
Which source to which input
This table gives an overview of the relation between Input Port #, Source Type and Selection Keys on the RCU:
Input Port # Source Type Selection Keys on the RCU
1 Composite video 1
2 S-video
2
./Composite video
3
2
3 RGB
4
3
4/5 RGB
4
4 or 5
4/5 Component video
5
6
1. Only available when the Optional D Limo Pro (R9828631) is installed.
2. Input signal Y/C (luma/ chroma)
3. Video or S-Video : switchable in the picture tuning menu.
4. Input signal : R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync).
5. Input signal : R-Y, Y and B-Y with separate composite sync or with separate hor and vert. sync or with composite sync on Y.
R5976354 BARCOREALITY 908 SPLIT PACK 10092002 35