Barco BARCOREALITY 6500 Owner'S Manual Download Page 62 | Manualshive

Page: 62 / 127

Barco BARCOREALITY 6500 Owner'S Manual Download Page 62

7. Random Access

7.5.2 Geometry start up

Start up

1. Push the cursor key

↑

or

↓

to highlight

Geometry

2. Press

ENTER

to select.

The geometry menu will be displayed. (menu 7-43)

RANDOM ACCESS

ADJUSTMENT MODE

FILE SERVICE

PICTURE TUNING

AUDIO TUNING

GEOMETRY

IEEE 1394

Select with

↑

or

↓

then <ENTER>

<EXIT> to return.

Menu 7-42

GEOMETRY

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

ASPECT RATIO [5:4]

OPTIONS

Select with

↑

or

↓

then <ENTER>

<EXIT> to return.

Menu 7-43

7.5.3 Shift

What can be done ?

The image can be shifted in a horizontal or vertical direction.

How to shift the image ?

1. Push the cursor key

↑

or

↓

to highlight

Shift

2. Press

ENTER

to select.

3. Push the cursor key

↑

or

↓

to shift the image in a vertical direction.

Push the cursor key

←

or

→

to shift the image in a horizontal direction.

Note:

The default value for the shift is 0.

Shifting in a vertical direction : when the shift value is positive, the image is shifted upwards, when the value is negative, the
image is shifted downwards.

Shifting in a horizontal direction : when the shift value is positive, the image is shifted to the right, when the value is negative,
the image is shifted to the left.

GEOMETRY

SHIFT

SIZE

SIDE KEYSTONE

BLANKING

ASPECT RATIO [5:4]

OPTIONS

Select with

↑

or

↓

then <ENTER>

<EXIT> to return.

Menu 7-44

7.5.4 Size

What can be done ?

The size can be adjusted in a vertical or horizontal way.

When adjusting the vertical size, The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower
side can be moved to its exact position.

When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.

58

R5976182 BARCOREALITY 6500 30012001

«
...
60
61
62
63
64
...
»

Summary of Contents for BARCOREALITY 6500
































































































































Reviews:

No comments