![background image](http://html1.mh-extra.com/html/barco/barcoelm-r18/barcoelm-r18_owners-manual_473893032.webp)
4. Connections
4. Press on both handles of the input module until the module plug seats in the connector of the projector. (image 4-4)
5. Secure the input module by tightening both retaining screws.
6. Reconnect the power cord to the wall outlet and switch on the projector.
Image 4-4
How to select the new installed module?
The new installed module can be selected with the digit buttons on the RCU or the local keypad.
4.5.4
Fixed slot (slot 1 & 2)
Where to find?
Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through
to a second projector. Within the installation mode it is possible to setup the input for 5 cable or DVI (panellink).
Which signals can be connected to slot 1 & 2?
Connector name/
Input signal
R
G
B
H
V
RGBHV
R
G
B
H
V
RGBS
R
G
B
S
-
RGsB
R
Gs
B
-
-
Composite Video
-
Video
-
-
-
Super Video
-
Y
-
-
C
Component Video — SS
R-Y
Y
B-Y
S
-
Component Video — SOY
R-Y
Ys
B-Y
-
-
DVI signals can be connected to the DVI input connector.
Pin assignment for the DVI connector.
Pin 1
TMDS DATA2-
Pin 13
TMDS DATA3+
Pin 2
TMDS DATA2+
Pin 14
+5 Power
28
R5976333 BARCOELM R18 17092002
Summary of Contents for BARCOELM R18
