![background image](http://html1.mh-extra.com/html/barco/barcoelm-r18/barcoelm-r18_owners-manual_473893025.webp)
3. Installation Guidelines
How to install ?
1. Remove the battery cover on the backside of the remote control by pushing the indicated handle a little towards the bottom of
the RCU. (image 3-14)
2. Lift up the top side of the cover at the same time.image 3-14
3. Insert the new 9 V battery (type E-block or equivalent) in the lower compartment.
4. Connect the battery (B) to the contact plate (A). (image 3-15)
5. Insert the battery into the lower compartment and put the cover back.
6. Insert a overview card (C) in the back side.image 3-15
Image 3-14
Opening the battery cover of
the RCU
Image 3-15
Mounting the battery into the RCU
3.10 Stacking Two Projectors
How to handle
1. Pull the handler A of the second projector a little backwards. (image 3-16)
2. Put the second projector on the first one so that base plate of the second projector matches with the rigging socket of the first
projector.
3. Slide the security pin (handler B) into the hole of the rigging socket of the first projector until the handler jumps into its socket (C).
R5976333 BARCOELM R18 17092002
21
Summary of Contents for BARCOELM R18
