Barco Athena, User Manual, Page: 23 / 74

4. Input & Communication
4. INPUT & COMMUNICATION
About this chapter
This chapter describes the functionality of the Local Keypad, the projector Status Light (tail light) and the different input and com-
munication ports of your Athena.
Note that all information about the ICMP is gathered into one separated chapter: "ICMP", page 31.
Overview
• Introduction
• Local Keypad
• Projector Status
• Cinema Controller
• Integrated Cinema Processor (ICP)
• HD-SDI Input Module (optional)
• Integrated Media Block/Server (optional)
4.1 Introduction
General
The Input & Communication side of the Athena consists of a Local Keypad integrated into the projector housing and a card cage
with three slots. The top side of the projector is equipped with a tail light which re
fl ects the status of the projector.
The projector card cage is equipped with an ICMP. See illustration below. Note that all information about the ICMP is gathered into
one separated chapter: "ICMP", page 31.
1
2
3
5
4
Image 4-1
1
Projector status light.
2 Power ON/OFF switch.
3 Local keypad.
4 Barco Cinema Controller.
5 ICMP.
C
AUTION
:
A unit may only be removed from the card cage by quali fi ed service personnel. Removing one of
the boards (except for the Cinema Controller) will result in an authorization request upon starting.
R5906789 ATHENA 16/12/2016 19