Barco AEC R9650105, Installation Manual

Page: 18 / 27

3. Physical Installation
3.2 AEC satellite
What has to be done ?
Mounting the AEC on the back of the display structure and integrate the satellite somewhere at the top or at the side of the display.
Image 3-3
AEC satellite sensors
A Sensor 1 (Satellite)
B 3 meter cable.
The AEC satellite contains only one light sensor.
Procedure
1. The distance between the mounting holes of the AEC and the distance between two vertical profiles on the back of the display
structure is not the same. For that a L-bracket is needed to bridge the gap between the AEC and the profile. Assemble the AEC
and the L-bracket together with two nuts. (image 3-4)
2. Mount the AEC box at the rear of the Display structure, with the sockets facing the back of the tiles, using 4 hammer bolts. Secure
tightly. Make sure that the cable output of the satellite is pointing downwards. (image 3-5)
3. Mount the satellite in the desired position. Make sure that the sensor inside the satellite is at the front of the display.
Image 3-4
A L-bracket.
B Nut.
12 R5976153 AEC 04112002