OTHER IMPORTANT POINTS:
Strong winds and low temperatures can affect the heating and performance of your gas bbq, so
factor in these elements when positioning your barbeque outdoors for cooking.
Never use your gas barbeque in a garage, porch, shed, breezeway or any other enclosed area. Your
gas barbeque is to be used outdoors only,
at least 60cm from the back and side, 100cm from
above for any combustible surface.
Your gas barbeque should not be placed under any surface
that will burn. Do not obstruct the flow of ventilation air around the gas barbeque hood, firebox and
cart. This gas barbeque is
not
intended to be installed in or on recreational vehicles and/or boats.
WARNING INFORMATION
IMPORTANT:
You must adjust the main control knobs only to
“LOW”
or
“OFF”
when the hood is closed
Read the following instructions carefully and be sure your barbeque is properly installed, assembled and
maintained. Failure to follow these instructions may result in serious bodily injury and/or property damage.
If you have any questions concerning assembly or operation, consult your dealer or LPG Gas Company.
When used on the ground always place the appliance and cylinder on flat level ground.
NEVER
light the BARBEQUE with the HOOD in the closed position.
NEVER
light the SIDE BURNER with the lid in the closed position.
NEVER
close the side burner lid while the side burner is lit or hot.
Storage of Appliance:
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the
appliance. When the appliance is not to be used for a period of time it should be protected from the
elements and stored in a dry dust free environment.
This barbeque is designed for use outdoors, away from any flammable materials. It is important that there
are
no overhead obstructions
It is important that the ventilation openings of the appliance are not
obstructed. The barbeque must be used on a level, stable, heat resistant surface. The appliance should be
protected from direct draughts and must be positioned or protected against direct penetration by any
trickling water (e.g. rain).
Parts sealed by the manufacturer must not be altered by the user. No modifications should be
made to any part of this barbeque and repairs and maintenance should only be carried out by an
authorised service technician.
Connecting to a Gas Cylinder:
Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator, burner
and burner ports. Spiders and insects can nest within and clog the burner/venturi tube at the orifice. A
clogged burner can lead to a fire beneath the appliance.
Clean burner holes if necessary with a heavy-duty pipe cleaner.
Disconnect the regulator from the cylinder when the barbeque is not in use.
Do not disconnect the hose
at the barbeque
. If the hose is replaced fit the new hose to the appliance using a spanner to tighten it
onto the connection thread. Check for leaks.
