Gas Cylinder Safety
Before assembling your barbeque, you should ensure your barbeque is suited to the type of
gas which you are going to use.
This is a low pressure barbeque and must only be used with the hose and regulator supplied. Your
barbeque is designed for use with 4kg or 9Kg refillable propane cylinders.
The cylinder should be filled by a filled by a reputable gas supplier and visually inspected at each
filling.
Always keep cylinder in an upright position. Always close the cylinder valve when the barbeque is not
in use.
Do not subject the cylinder to excessive heat.
NEVER STORE YOUR GAS CYLINDER INDOORS.
If you store your barbecue indoors, ALWAYS disconnect the cylinder first and store it safely outside.
Cylinders must be stored out doors in a well ventilated area out
Hose and Regulator Safety
The regulator and hose assembly supplied with the barbeque are suitable for propane only.
The gas regulator adjusted to have an outlet pressure of 2.75kPA and is supplied for connection to
the LPG cylinder. Hose diameter 8mm
The pressure regulator and hose assembly supplied with the barbeque must be used. Replacement
pressure regulators and hose assemblies must be those specified by the barbeque manufacturer.
When connecting the hose and regulator assembly to the gas cylinder, take care to avoid
unnecessary twisting or kinking of the flexible hose.
After the assembly has been secured, turn on the gas cylinder and check for leaks by brushing a
soap and water solution over all connections.
Do not connect your barbecue to a gas cylinder exceeding
9kg capacity.
Never connect an unregulated gas cylinder to your
barbeque. Use only the hose and regulator supplied.
Never operate this barbeque without the correct regulator
