Assembly Instructions
CAUTION:
You will need to build the island unit before assembling the side burner. While it is possible for one
person to assemble this side burner, obtain assistance from another person when handling some of the larger,
heavier pieces.
7
2
For NG model(BGTSB15ANG), install NG Regulator and 12 Foot Hose
Install the NG Regulator onto the Manifold Extension Fitting and tighten securely.
Connect the Swivel Nut of the 12 foot Hose onto the NG Regulator.
NOTE: Make sure the 12 ft. NG hose stays away from sharp edges.
WHEN YOU FINISHED THIS STEP, PLEASE SKIP TO STEP 4.
Install Side Burner Lid Knob and Ignitor Battery
Open the Side Burner Lid.
Align the hole on the Side Burner Lid and the hole on the Side Burner Lid Knob. From the underside
of the Side Burner Lid, insert 1 Phillips Head Screw M4x8 and tighten securely.
Remove Ignitor Cap from Control Panel.
Place supplied AA battery into the Ignitor Slot with positive pole facing you.
Position the Cap and Spring over the AA battery and tighten onto Control Panel.
1
Island shown for illustrative purposes.
Manifold
Swivel Nut
Vertical
Fitting
Natural Gas Hose
Inlet Diameter:3/8''
length:12 foot
Ignitor Cap
Ignitor Slot
AA Battery
Spring
+
-
Phillips Head Screw
M4x8
Qty. 1
Part # S112M04081
Side Burner Lid Knob
Qty. 1
Part # P00215001B
(Sold separately)
