18
STEP 6
ATTACH RANGE HEAD TO CART
This step requires two people to lift and position the
RANGE HEAD
onto cart.
Remove the tie wraps and packaging securing the hose and regulator to the underside of the Range Head.
Carefully lower the Range Head onto the cart. Make sure the hose and regulator is fed into the cart through the
hole in the rubber seal on the top panel. Attach the Range Head to the cart with
six M4x10mm bolts
.
STEP 7
ATTACH THE DOORS
Remove the
four M4x8mm bolts
already pre-assembled to the
DOOR HANDLES
, and use them to attach the
door handles to
DOORS
.
Insert the lower door pin into the hole on the bottom shelf. Push down the upper door pin, align it beneath hole in
the door pin bracket, and release pin so that it inserts in hole.
Repeat this for the other door.
Note: If the doors do not line up when closed or cannot close freely, loosen the bolts on the door pin bracket.
Adjust the door pin bracket as necessary, and retighten bolts. Recheck door alignment once barbeque is
completely assembled and readjust if necessary.
DOOR HANDLE
DOOR
Summary of Contents for Discoverer Island
Page 45: ...45...
