15
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
PREVENTION/ CURE
Burner will not light
No Gas Flow
Check LG Gas cylinder is full. Replace gas
cylinder.
Obstruction of gas flow Check for bent or kinked regulator hose.
Clean burner ports.
Spider webs or
obstruction in venturi
Clean venturi.
Burner ports blocked
Clean burner ports.
Bad piezo ignitor spark Check to see if burner will match light.
Check to see if piezo electrode is producing spark.
The spark should be visible and jumping from the
ignitor to the burner. If you cannot see any spark
you may need to slightly adjust the position by
bending the electrode a little closer or further away
from the burner.
Replace piezo ignitor or replace the piezo wire.
Irregular flame pattern.
Flame does not run the
full diameter of burner
Burner ports blocked
Clean burner ports.
Flame is yellow or orange Burner may be blocked Clean burner ports.
Spider webs or
obstruction in venturi
Clean venturi.
Food residue or grease
on burner
Clean burner.
Burner may have
residue
Turn burner to high setting for 5 mins and burn
with the door open.
Burner will not stay alight Gas Bottle is empty
Check LG Gas cylinder is full. Replace gas
cylinder.
Flame Failure Device
(FFD) sensor is not
positioned correctly
Reposition FFD sensor. Refer to page 16 of
manual for instructions.
FFD device is faulty. Replace FFD.
IF YOU HAVE ANY QUESTIONS OR QUERIES ABOUT THE OPERATION OR MAINTENANCE OF
YOUR GAS PIZZA OVEN PLEASE CALL THE CUSTOMER SERVICE NUMBER ON 1300 301 392.
ARROSTO GAS PIZZA OVEN-Manual_v5.indd 15
19/12/17 1:28 pm
