9
STEP 5 ASSEMBLING THE STAND
— The stand is made up of the top storage shelf (15), the gas bottle shelf (16) the front and back
legs (11,12,13,14). Please note the bottom shelf has an opening to hold the gas bottle. This
recess should be closest to the back of the pizza oven. The back legs can be recognised by
a small right angle at the top of the leg. Attach each leg to the storage and gas bottle shelves
using 8 x M6x10mm screws as shown below.
— Repeat for the other three legs.
— Attach the other 3 legs to the storage and gas bottle shelves using (8) M6x10mm screws in
each leg.
Note, the position of each leg tab, must be at the top and facing the correct direction as
shown above. Make sure all the screws are tightly assembled.
11
12
14
13
ARROSTO GAS PIZZA OVEN-Manual_v5.indd 9
19/12/17 1:28 pm
