Barbecook 223.9422.000, User Manual

Page: 8 / 400

8 www.barbecook.com
6.2 Safety instructions
• Never connect the cylinder directly to the appliance. Always
mount a pressure regulator on the cylinder first.
• Never modify pre-assembled or sealed parts of the cylinder,
the hose or the pressure regulator.
• Keep the hose as short as possible (500 to 650 mm maximum)
to prevent it from dragging on the ground.
• While connecting the cylinder, hose and pressure regulator:
- Never distort the hose.
- Always keep the cylinder in an upright position.
- Never open the gas supply.
• Check for leaks each time you make changes to the gas
connection. See “7 Checking for gas leaks”.
6.3 Connecting the hose to the
appliance
To connect the gas hose to the appliance, you have to mount a
coupling on the gas tube of the appliance. The appliance comes
with two couplings, both intended for particular countries:
2
If your country is not in the table, use the coupling that
complies with your national standards.
6.3.1 C
OUPLING
A
You need a 19 mm spanner and a cross-slotted screwdriver.
1 Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 19 mm spanner (B).
2 Slide the hose over the coupling (C) and tighten the
clamping ring with a cross-slotted screwdriver (D).
6.3.2 C
OUPLING
B
You need a 22 mm spanner and an adjustable spanner.
1 Screw the coupling on the gas tube of the appliance (A) and
tighten it with a 22 mm spanner (B).
2 Screw the gas hose on the coupling (C) and tighten it with
two spanners. Hold the coupling with a 22 mm spanner,
while turning the hose with an adjustable spanner (D).
Country Coupling
BE, CH, CZ, DK, ES, FI, GB, IE, IT, PT, SI Coupling A
FR Coupling B
A B
A B
C D
A B
C D
MAN_GAS_QUISSON_BBC_140730_A.book Page 8 Tuesday, February 2, 2016 4:55 PM