background image

7

UNILUX-6  52

Installation instructions

INTRODUCTION

1.1       GENERAL

Congratulations on your purchase of this modern Barbas appliance. 

This quality product will provide you with many years of enjoyment due to the fl ame 
effect and warmth that it provides.

Study this manual carefully before using the fi replace. We recommend you keep this 
manual in a safe place for reference purposes.

1.2    SAFETY AND INSTALLATION INSTRUCTIONS 

•  Do not place fl ammable objects within 100 cm of the appliance. Pay special attention  
  to furnishings and ornaments around the appliance.
 
•  During installation of the appliance, a clearance of 3 mm should be maintained on all  
  sides of the appliance to allow for expansion of the appliance during operation.
 
•  When you use your appliance, the exterior will become hot. Always wear the glove  
  or use the accessories supplied when fi lling etc. 
  Protect yourself and others (especially children!) from burns. Do not leave children  
  unattended when the appliance is burning.

•  Watch your clothing. Synthetic clothing in particular can easily catch fi re and burn  
  intensely.

•  Do not approach the appliance with fl ammable materials or liquids. Any work with  
  solvents, adhesives etc. in the space heated by the appliance can be very 
  dangerous. 

•  It is not allowed to connect the appliance to a fl ue which is already connected to  
  another appliance.

•  Check the chimney. Cracks in the chimney may not only lead to damp, staining
  of walls and leaking of smoke, they can also impair the carrying off of smoke.

•  Prevent your chimney being soiled from above (birds’ nests etc.) by fi tting a suitable  
  cap to the chimney pot.

•  Avoid chimney fi res! Have your chimney swept at least once per year -   more often  
  if you use your fi re a lot. Prevent excessive deposits of soot inside the chimney by  
  not burning freshly-cut wood. Instead, burn clean, dry chopped wood.

•  Follow the instructions issued by your local fi re brigade.
  The appliance can be taken in operation if national and local regulations are satisfi ed. 

The required constructive adaptations should be satisfi ed as well.

Summary of Contents for UNILUX-6 52





















































Reviews: