barbas ECO 810, Installation Instructions Manual

Page: 35 / 48

35
ECO 810
9. AMOUNT OF FUEL
9.1. AMOUNT OF FUEL
Each appliance is constructed for a certain maximum amount of fuel. Remember
that the more fuel you put into your stove, the hotter it will become and
overheating may even occur. If this happens, there is a risk of fi re. It may also
damage your appliance and chimney. BARBAS will not assume liability for
damage caused by overheating.
If you have chosen the right appliance for your room, it will provide suffi cient
heat with a single layer of wood blocks (a wood block is approx. 25 cm long and
30 cm around the edges).
Burning one layer of wood can lead to varying outputs. When used correctly, one
load will burn in around one hour. Putting in too much wood at once can lead to
the appliance being overloaded.
You can best vary the capacity of your appliance with the amount of fuel.
Fuel required for an output of approximately 10 kW and an effi ciency of 75%:
Wood: 2 blocks, each around 1.50 kg
Briquettes: 5 briquettes, each around 0.5 kg
Coal: around 2.0 kg (
≈
7 kW)