5.
Put some kindling wood above the
firestarter cubes.
6.
Light the fire starter cubes with a lighter or a match.
7.
Close the door of the appliance.
After approximately 20 minutes the wood logs burn. Dependent on the quality of the
chimney the wood logs burn for approximately 1 to 1.5 hours. Do not open the door of the
appliance before the last flames have almost disappeared or the "Refill" notification has
appeared.
7.4.3
Reload with fuel with Opti-Air
Caution:
If there is insufficient burning material in the firebed to light a new fuel charge,
excessive smoke emission can occur. Refueling must be done onto a
sufficient quantity of glowing embers and ash to make sure that the new fuel
charge will ignite in a reasonable period. If there are too few embers in the fire
bed, add suitable kindling to prevent excessive smoke.
Note:
The procedure hereunder is a general description. The Barbas Opti-Air app
indicates when a reload with wood logs is necessary.
The Opti-Air system works best with closed door during operation.
1.
Wait until the notification "Refill" appears in the Opti-Air app or until the last flames
have almost disappeared.
2.
Open the door.
3.
Reload the appliance with 2 or 3
wood logs, dependent on the chosen
combustion level. Refer to section
of fuel.
4.
Close the door.
5.
If desired change the combustion
level or change to room temperature
control with the Barbas Opti-Air app.
Operation
Cuatro-7 75-60
23
