After first few times of use of the appliance, a light deposit on the inside of the glass may
occur caused by curing of the paint. This can be removed with glass cleaner or ceramic
hob cleaner.
88.3
Firing the appliance
8.3.1
First load and ignition
At the beginning the appliance and chimney is cold. It is important that both the appliance
and chimney reach a temperature that guarantees a good functioning of the appliance. A
too low temperature results in incomplete combustion and a poor chimney draught. To
avoid this do the following:
Warning:
Do not use the appliance when there is fog or haze or no wind.
1. Put the control lever in the far right position.
2. When, present, open the valve in the external combustion air supply line.
3. When present, open the chimney valve completely.
4. Open the door of the appliance.
5. Put minimum 4 wood logs crosswise
on the floor of the combustion
chamber.
6. Put some kindling wood and 1 or 2
firestarter cubes on top of the wood
logs.
7. Put some kindling wood above the
firestarter cubes.
Operation
Box Panorama 65
19
