background image

OUTDOOR LINEAR FIRE PIT MANUAL 

OUTDOOR BURNERS:

 OB24MAN, OB24MAP, OB24MVN, OB24MVP,  

OB36MAN, OB36MAP, OB36MVN, OB36MVP,  

OB48MAN, OB48MAP, OB48MVN, OB48MVP,  

OB72MVN, OB72MVP, OB96MVN, OB96MVP 

-CERTIFIED FOR USA & CANADA- ANSI Z21.97-2014 • CSA 2.41-2014 OUTDOOR DECORATIVE GAS APPLIANCES 

 NOTE: LP MANUAL (MAP) VALVE SYSTEMS ARE SHIPPED WITH AN ACCOMPANYING ORIFICE FOR NG CONVERSION.  

ALL MILLIVOLT VALVE SYSTEMS ARE SHIPPED AS NG SYSTEMS (MVN) AND REQUIRE A CONVERSION KIT FOR LP CONVERSION. 

OUTDOOR FIRE STANDS

 (c/w Burner)

:

 OFS24MAN, OFS24MAP, OFS36MAN, OFS36MAP, OFS48MAN, OFS48MAP  

OUTDOOR FIRE TABLES 

(Burner Required)

:

 OLTN24, OLTW24, OLTN36, OLTW36, OLTN48, OLTW48 

 

OUTDOOR FIREPLACES 

(Burner Required)

:

 

OFP4336S1, OFP4336S2, OFP5548S1, OFP5548S2, OFP7972S1, OFP7972S2 

 

 

 

⚠ 

DANGER

 

If you smell gas: 
1. Shut off gas to the 

appliance. 

2. Extinguish any open flame. 

3. If odor continues, keep 

away from the appliance 

and immediately call your 

gas supplier or fire 

department.

 

⚠ 

WARNING

 

Do not store or use gasoline 

or other flammable vapors and 

liquids in the vicinity of this or 

any other appliance. 
An LP-cylinder not connected 

for use shall not be stored in 

the vicinity of this or any other 

appliance.

 

⚠ 

WARNING

 

For Outdoor Use Only. 

⚠ 

WARNING

 

Improper installation, 

adjustment, alteration, service 

or maintenance can cause 

injury or property damage. 

Read the installation, 

operating and maintenance 

instructions thoroughly before 

installing or servicing this 

equipment. 

 

 

DANGER

 

CARBON MONOXIDE HAZARD 
This appliance can produce carbon 

monoxide which has no odor. 

 

Using it in an enclosed space can 

kill you. 

 

Never use this appliance in an 

enclosed space such as a camper, 

tent, car or home. 

 

 

 

Kingsman Fireplaces   2340 Logan Ave., Winnipeg, Mb Canada Ph: 204-632-1962           Printed in Canada P/N 24LFP-MAN May 28, 2018 

INSTALLER:

 Leave this manual with the appliance. 

CONSUMER:

 Retain this manual for future reference. 

This appliance is designed as an “attended appliance”. Adults 

must be present when the unit is operating. DO NOT leave this 

unit burning when unattended. If this product is left burning 

unattended it may cause damage or serious injury. 

OLTN / OLTW

 

OUTDOOR FIRE TABLE 

OFP S1 / S2

 

OUTDOOR FIREPLACE 

OB

 

OUTDOOR BURNER 

OFS 

OUTDOOR FIRE STAND 

 

Summary of Contents for OB24MAP





















































Reviews: