16
INCASSO APPARECCHIATURA
Accertarsi del perfetto stato e della stabilità
del mobile nel quale saranno incassate le apparec-
chiature (AS/NZS 5601).
Preparare un foro di incasso con le misure indicate in
fig.
9A-9B
; se l’apparecchiatura sarà incassata sopra un forno, è
necessario predisporre anche un pannello di separazione
distante almeno 1 cm dal fondo della stessa, forato nella
parte posteriore per il passaggio del tubo gas e dell’ali-
mentazione elettrica dell’apparecchiatura.
Assicurarsi che vi sia un’adeguata ventilazione
nella parte inferiore del piano di cottura.
[mm]
[mm]
Incasso /
Built-in
65
65
90
90
4
[mm]
590
490
830
480
[mm]
1070
370
110
110
9A
BUILT-IN UNIT INSTALLATION
Make certain that the cabinet in which you
will be installing the appliance is in perfect condition
and completely stable (AS/NZS 5601).
Prepare an embedded hole with measurements as specified in
figures 9A-9B
; if the appliance is to be installed above an oven,
it is also necessary to provide an isolating panel with a distance
of at least 1 cm from the base of the appliance; the isolating
panel must be placed under the appliance to allow for the gas
pipe and the appliance’s supply of electrical power.
Ensure there is adequate ventilation to the underside
of the built-in hotplate.
Summary of Contents for 1PMD64
Page 30: ...Note...
Page 31: ......