20
GENERAL INFORMATION
Carefully read this use and maintenance manu-
al, where important information about installation,
use and maintenance safety is provided. Keep
this manual for future reference. Any installation
operation (electric connections) shall be per-
formed by specialized personnel, in compliance
with all standards and regulations in force.
SAFETY WARNING
The use of flat-bottomed pots,
with a diameter equal to or slight-
ly bigger than the heated area,
is recommended. (Fig.6). Do
not use pots that have a rough
base, in order to prevent the
hob thermal surface from being
scratched. This appliance is not
intended for use by children or in-
firm people without supervision.
IMPORTANT
- Avoid the overflow of liquids
by reducing the heat supply
when boiling or warming liq-
uids.
- Do not leave any heating ele-
ment switched on, if there are
no pots, or if the pots are emp-
ty.
- Once cooking is completed,
turn the concerned heating el-
ement off, by using the control
shown below.
- This appliance is not intended
for use by people (children in-
cluded) with limited physical,
sensorial or mental abilities,
or lacking of experience and
knowledge, unless they are
supervised or well instructed
about the use of the appliance,
by a person who is responsi-
ble for their safety.
-
Children should be super-
vised to assure that they do
not play with the appliance.
- If the hob surface is cracked,
turn the appliance off and dis-
connect it from the electric
network , so as to avoid the
possibility of electric shock.
INSTALLATION
INSTRUCTIONS
These installation instructions are intended for a
specialized installer and are meant as guidelines
for the hob installation, adjustment and mainte-
nance, in compliance with any regulations and
standards in force. If a built-in oven or any other
appliance generating heat is to be mounted direct-
ly under the vitro-ceramic hob,
IT IS NECESSARY
THAT SUCH AN APPLIANCE (the oven) AND THE
VITRO-CERAMIC HOB ARE PROPERLY INSULATED
.
Failure to comply with this precaution might result
in the incorrect operation of the TOUCH CON-
TROL system.
• Positioning:
This household appliance has been designed for
built –in installation onto a worktop, as shown in
the figure (Fig. 1- Cut dimensions). Use sealing
material along the whole perimeter (Fig.2). This
operation is necessary in order to prevent any liq-
uid from entering inside the hob, being that the
flatness of the top, the glass and their coupling
cannot be assured. Gently push the appliance
into the built-in hole (Fig.4). If, after installation,
the lower part of the appliance is accessible from
the lower part of the cabinet, it will be necessary
to mount a spacing panel at the distances given
(Fig.3).
Induction Hob
|
User instructions
EN
Summary of Contents for 1PIDC30N
