Baracoda IDBlue – User Guide v2.4.2
- 7 -
4.
Quick Start up guide
4.1 How to read tag
In order to read/write a tag, press the trigger button. The on-board LED will change to amber to indicate that
the device is busy (attempting to scan RFiD tags).
Position the reader in a perpendicular position to the tag and position the tip a few millimeters to one side of
the tag, the optimal read range for most tags will be 0-2cm.
Once the device is within range of the RFiD tag, the device will beep (single short beep) and the LED will change
back to green.
If the device cannot find the tag before the operation times out (the default value is 4seconds), the device LED
will change to red.
Data Capture
for Workforce
in Motion
All manuals and user guides at all-guides.com