bar BAR4013-HJ, User Manual, Page: 19 / 47

1 9
1. Place pressure cleaner near an outside water source capable of supplying
water at a flow rate of at least 1GP M greater than the rated flow of your
pressure cleaner . I t should also be no less than 2 0 PS I at pressure cleaner
end of garden hose. DO NO T siphon standing water.
2. M ake sure unit is in a level position and apply handbrake (if fitted) or
"chock" wheels as needed.
3. C onnect garden hose to water inlet on pressure cleaner pump or tank.
4. C hoose desired spray tip, pull back no zz le extension collar, insert spray
tip and release collar. Tug on spray tip to make sure it is securely in place.
See
Spray Tips.
NOTICE
DO NO T run the pump without the water supply connected
and turned on.
• D amage to e q uipment resulting from failure to follow this
instruction will void warranty.
STARTING YOUR CLEANER
H o w to Start Y our Pressure C leaner
To start your pressure cleaner for the first time, follow these instructions step-
by-step. This starting information also applies if you have let the
pressure
cleaner sit idle for at least a day.