Low Range ZPM - Zone Pressure Sensor
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com
Specifications subject to change without notice.
2 of 4
Installation & Operations
38926_ins_ZPM_LR
rev. 04/09/20
Mounting
Fig. 6:
Mounting Hole
Template - shown
actual size
(BAPI recommends
creating 5/32” pilot
holes for the #10x3/4”
self-tapping mounting
screws.)
Center
hole is only
needed for
the Attached
Tube (-AT)
version of the
ZPM unit
Attach the unit to its mounting surface
with four self-tapping #10x3/4” sheet
metal screws through the holes in the
mounting feet. The preferred mounting
orientation is with the pressure ports
facing down.
Remove the deadhead tubing and push
the system tubing onto the port nipple
without creating any kinks or holes.
Fig. 3:
ZPM Mounting
(for units without Attached
Tube option)
Fig. 5:
Cover
Latch Screw
Fig. 4:
ZPM Mounting
(for units with Attached
Tube option)
A locking screw can
be inserted into the
hole in the cover
latch to prevent
unintentional cover
openings.
