Termination and Troubleshooting
Water Leak Detector (BA/LDT) 5 Amp Relays
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com
rev. 09/01/21
26268_ins_LDT
1 of 6
Overview & Identification
The Water Leak Detector is designed to sense the presence of water and alert a central monitoring system of the
potentially destructive situation. The unit is available in three different models with the Attached Sensor, Remote
Sensor and Rope Sensor shown in the figures below.
Fig. 2:
Water Leak Detector with Attached
Sensor in a System Diagram
Fig. 1:
Water Leak
Detector with
Attached Sensor
Fig. 4:
Water Leak Detector with Remote Spot Sensor or optional
Water Rope Sensor (not shown) in a System Diagram
Fig. 3:
Water Leak Detector
with Remote Spot
Sensor (right) and
Water Rope Sensor
(below)
Cautions/Warnings
This unit is not intended to be a safety device. In no event shall BAPI
or its officers, directors, employees or agents be liable to any company
or individual for any indirect, incidental, special, exemplary, punitive
or consequential damages including, without limitation, economic or
commercial losses, arising out of or resulting from the misuse of this
water detector as a safety device.
