ADVANCED OPERATION
24. PRIORITY TRANSMITTING "TXAB"
When activate function "Dual Watch", the frequency display will switch between F1
and F2. If you come to MENU 24, select F1 or F2, the TX will be selected. Please
see the following steps:
1. Press the [MENU], then press [UP]/[DOWN] to select the Menu 24 "TXAB".
2. Press [AB/
], then press [UP]/[DOWN] to select F1/F2/OFF.
3. Press [AB/
] to save the setting.
4. Press [MENU] or any numeric key to exit.
25. REVERSED DUPLEX MODE "REV"
When the reversed duplex mode is selected, the receive frequency shifts (Transmit
frequency shifts in normal duplex mode). Each receive and transmit frequency is
shown in the table below with the following conditions:
Input
Frequency
Direction
Offset
frequency
Reversed
(ON)
Reversed
(OFF)
435.625 MHz
- (negative)
0.6MHz
435.025MHz
435.625 MHz
1. Press the [MENU], then press [UP]/[DOWN] to select the Menu 25 "REV".
2. Press [AB/
], then press [UP]/[DOWN] to select ON/OFF.
3. Press [AB/
] to save the setting.
4. Press [MENU] or any numeric key to exit.
26. TONE END OF TRANSMISSION "STE"
This function is used to activate or deactivate the transmission end of the transceiver.
This final tone transmission only be used in communications between transceivers
and not in communications through a repeater, which must be deactivated.