39
31
DELCH - Delete a
memory channel
001 - 999
This menu is used to delete the programmed
information from the specified channel (001
through 999) so that it can either be
programmed again or be left empty.
32
AL-MOD
- Alarm Mode
•
SITE [0]: Sounds alarm through your radio
speaker only
•
TONE[1]: Transmits a cycling tone
over-the-air
•
CODE [2]: Transmits '119' (911 in reverse)
followed by the ANI code over-the-air
•
SITE: Sounds alarm through your radio speaker
only
•
TONE: Transmits a cycling tone over-the air
•
CODE: Transmits '119' (911 in reverse?)
followed by the ANI code over-the-air
33
STE
- Squelch Tail
Elimination
OFF [0] | ON [1]
This function is used eliminate squelch tail noise
between BaoFeng handhelds that are
communicating directly (no repeater).
Reception of a 55 Hz or 134.4 Hz tone burst
mutes the audio long enough to prevent hearing
any squelch tail noise.
34
RP-STE - Squelch Tail
Elimination
OFF [0] | 1 - 10
This function is used eliminate squelch tail noise
when communicating through a repeater.
35
RPT-RL
- Delay the squelch tail
of repeater
OFF [0] | 1 - 10
Delay the Tail Tone of Repeater (X100
milliseconds)
36
ROGER - Roger Beep
OFF [0] | ON [1]
Sends an end-of-transmission tone to indicate to
other stations that the transmission has ended.
37
TONE-Tone-burst
1000[0]|1450[1]|1750[2]|2100[3]
To send out a tone-burst; you simultaneously will
press a key while holding down the PTT. No
further configuration required using this feature.
38
MENU EXIT TIME
5 [0] 10[1] - 60[10] in 5 second steps
(TIMEOUT-5)/5=[n]
The time setting for menu exit without menu
operation.
39
VOX DELAY
0.5 [0] 0.6[1] -2.0[15] in 0.1 second steps
(TIMEOUT-0.1)/0.1=[n]
There’s a brief delay between when you finish
talking and the radio returns to tx mode; this
delay can be adjusted.
40
POWER ON MSG
- Power On Message
LOGO[0]|VOLTAGE[1]
Welcome message displayed immediately after
startup.
The LOGO is programmed by the manager.
