36
6
ABR - Display
Illumination Time
ON [0] | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
Time-out for the LCD backlight. (seconds)
7
TDR - Dual Watch,
Dual Reception
OFF [0] | ON [1]
Monitor [A] and [B] at the same time. The display
with the most recent activity ([A] or [B]) becomes
the selected display
8
BEEP - Keypad Beep
OFF [0] | ON [1]
Allows audible confirmation of a key press
9
TOT- Transmission
Time-out-Timer
OFF [0] 15[1] - 180[12] in 15 second steps
(TIMEOUT-15)/15=[n]
*This feature provides a safety switch that limits
transmission time to a programmed value. This
will promote battery conservation by not
allowing you to make excessively long
transmissions, and in the event of a stuck PTT
switch it can prevent interference to other users
as well as battery depletion
10
R-CTCS
- Receiver CTCSS
OFF [0] | see CTCSS Table in Appendix C
Mutes the speaker of the transceiver in the
absence of a specific and continuous sub-audible
signal. If the station you are listening to does not
transmit this specific and continuous signal, you
will not hear anything.
11
R-DCS
- Receiver DCS
OFF [0] | see DCS Table in Appendix C
Mutes the speaker of the transceiver in the
absence of a specific low-level digital signal. If
the station you are listening to does not transmit
this specific signal, you will not hear anything.
12
T-CTCS
- Transmitter CTCSS
OFF [0] | see CTCSS Table in Appendix C
Transmits a specific and continuous sub audible
signal to unlock the squelch of a distant receiver
(usually a repeater).
13
T-DCS
-Transmitter DCS
OFF [0] | see DCS Table in Appendix C
Transmits a specific low-level digital signal to
unlock the squelch of a distant receiver (usually a
repeater).
14
Scan CTCSS
OFF
Allows scanning of CTCSS in VFO frequency
mode. This operation is not allowed in channel
mode.
15
Scan DCS
OFF
Allows scanning of DCS in VFO frequency mode.
This operation is not allowed in channel mode.
