Picture 2: Firmware update
4. Programming the DM-V1
NOTE:
If you need to configure this product parameter yourself, please follow the steps below!
Before programming your radio, read the current information from the radio to your PC to create an
initial CPS template and at the same time backup the factory data for future use.
When reading or writing data from or to the DM-V1, the software offers various possibilities:
4.1 Read data
To read in all frequency settings as well as further settings from your DM-V1 radio, use this option.
Picture 3: Read data
4.2 General setting
The DM-V1 radio supports quite a bunch of general settings. To get there use ’Program’ -> ’General
Setting’ -> ’Parameter’.
