The connector is located on the upper side of the unit (8).
Insert the earpiece plug into the connector (2,5mm jack).
The small button on the earpiece has the same function as the TALK-button (15) on
the unit
When you use the TALK-button (15) from the Earpiece, you must also use the microphone
from the earpiece to talk into.
Note:
Do not connect other earpieces. This may damage your device.
1
7
. Battery saving function:
When the device has not been used for 6 seconds, the economy mode is automatically
activated. This does not affect the reception of transmissions and the standard mode
is automatically re-activated as soon as a signal is detected.
1
8
.BUILT-IN FLASH LIGHT
As an added feature, your Radio’s has a built-in flashlight that can be used in
sending light signals or for your lighting needs.
19
. Technical specifications
Channels 7
Range Up to 3 Km (Open field)
Battery 3xAAA
Transmission Power ＝＜500mWERP
Modulation Type FM-F3E
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union
and other European countries with separate collection systems) this symbol on the
product or on its packaging indicates that this product shall not be treated as
house hold waste. Instead it shall be handed over to the applicable collection point
for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will help
to conserve natural resources. For more detailed information about recycling of
this product, please contact your local city office or your household waste disposal
service.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
SAR tests are conducted using standard operating positions accepted by the FCC with
the device transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum value.
Before a new model is a available for sale to the public, it must be tested and
