38
(13) Monitor (SP-MUTE)
–
MENU +13
With this function, the monitor opens if one of these options is detected:
• QT: Whe
n radios is set in this mode, the monitor feature is activated only when the radio receives the correct CTCSS tones.
• QT + DTMF: With this option, the monitor is activated when the radio receives the correct CTCSS tone and the correct DTMF c
ode.
• QT*DT
MF: The monitor is activated when the radio receives the correct CTCSS tone or the correct DTMF code.
(14) Scan Add (Scan Add)
–
MENU+14
In channel mode, to scan the current channel, the channel must be added to the scan group.
•
On:
Turn on the scan function of the current channel.
•
Off:
Do not scan the current channel.
(15) Busy Channel Lock (Busy Lock)
–
MENU+15
When this function is on, it may prevent other radios’ interference. If the selected channel is being used by other radios, w
hen you press key
PTT
, your radio cannot transmit.
Release the PTT and transmit as soon as the frequency is no longer busy.
(16) Channel Memory - (CH-Memory)
–
MENU +16
This menu is used to either create new or modify existing channels (1 through 100) so that they can be accessed from MR/Channel Mode.
The channels already stored are displayed as CH-XXX ("CH" and -channel number), and other channels only display channel numbers.
(17) Channel Delete (CH-Delete)
–
MENU +17
This menu is used to delete the programmed information from the specified channel (1 through 100) so that it can either be programmed again
or be left empty.
