35
•
ANI-ST:
Side Tones are heard only from automatically keyed DTMF codes.
•
DT+ANI:
All DTMF Side Tones are heard.
(21) PTT-ID (PTT-ID)
–
MENU + 21
When to Send PTT-ID Codes are sent during either the beginning or ending of a transmission.
With this function you can decide when sending the ANI-ID code in tx mode.
You can choose amongst 4 possibilities.
•
Off:
Press PTT to turn it off. That is, the current channel or VFO mode disables DTMF signaling.
•
BOT: T
he code is sent when you press the PTT.
•
EOT:
The code is sent when the PTT is released.
•
BOTH:
The code is sent when you press and release the PTT.
(22) Signal code sending delay (PTT-DLY)
–
MENU + 22
PTT-ID signal code sending delay time setting, range 100-3000ms.
(23) 1750Hz Repeater Tone (ALERT)
–
MENU + 23
With this function you can select
1000Hz, 1450Hz, 1750Hz, 2100Hz
repeater tone. To send out a repeater tone; You hold down the
[PTT]
+
key.
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to unlock your radio.
(24) Squelch tail elimination (TAIL)
–
MENU + 24
This function is used eliminate squelch tail noise between handhelds that are communicating directly (no repeater). Reception of a 55 Hz or
134.4 Hz tone burst mutes the audio long enough to prevent hearing any squelch tail noise.
(25) SK2 function definition(Press SK2)
–
MENU + 25
The SK2 key allows users to customize functions:
•
FM RADIO
: FM radio on/off.
•
SCAN
: Scan on/off.
•
SEARCH
: one touch Search on/off.
•
VOX
: Vox on/off.
