Introduction
Lead-2 peristaltic pump is an accurate flow rate pump. Its acceptable
pump heads are 15-48, 15-88, 15-24 and 15-44. 2, 4 and 8 channels
are available. It offers flow rates of 0.001
300 mL/min. It has flow
rate and speed adjusting function. Lead-2 has other functions like
start/stop, cw/ccw, prime (fast filling and empting), flow rate
calibration, tubing selection, RS485 communication and remote
control, etc.
1
S1
S2
P1
P3
P2
Operation Panel
2
LCD Screen
Prime Key
Direction Key
Start/Stop Key
Adjusting Knob
ID 0.5
INT
100.0
RPM
▲
▲
LEAD - 2 OPERATING MANUAL
LEAD - 2 OPERATING MANUAL
S Standard Configuration
S1 Pump Head
S2 Driv
P
Parts
P1 Power Switch
P2 Remote Control Interface
P3 Power Socket
Reference:
For detail information about external control function please see
page 13.
Basic Operation
Start/Stop Key
Press the
to start or stop the pump.
Direction Key
Press the
to change the rotation direction of the
pump. This key is valid when the pump is running.
Adjusting Knob
Function 1: Adjust the flow rates or speed in running state.
Function 2: In menus selection state when the pump is idle, press
the
for confirmation and turn the
for selecting and setting the menus.
Prime Key
In common state, press the
to enter prime state when
the pump runs at full speed for empting, filling and rinsing
operation; Press the
again to return to common state.
In prime state, other keys are invalid except
.
Prime state interface is shown as below:
Start/Stop Key
direction key
adjusting knob
adjusting
knob
Prime Key
Prime Key
Direction Key
