BANZAI 69987 20121103 9
Use Instructions
To use the 3-D aqua goggles
1. Remove the protective cling from the lenses.
2. Place headstrap between both hands.
3. Raise goggles over head and stretch the
headstrap to fit the base of the head. Position
lenses over eyes and press gently to achieve a
suction effect.
4. The goggles should feel secure and fit
comfortably. To adjust the headstrap, gently
pull the strap ends to tighten or loosen them
around the adjuster clip.
To remove 3-D aqua goggles:
5. Take hold of the lenses and gently lift them up
onto your forehead.
6. Push them over the top of your head.
Always remove goggles gently. Do not pull
them directly away from your face, as they
can spring back and hurt your eyes.
To exchange the bridge:
7. It is important to exchange the bridge properly
to ensure a comfortable fit and to make them
waterproof.
WARNING! 3-D aqua goggles are intended for
use only with the 3-D Shark Bite Water Slide™.
Do not use as swimming goggles underwater in
a pool or for other recreational water sports.
8. Position the bridge under the hook by firmly
pushing it into position.
9. Push hole in the bridge upward firmly over the
hook.
10. Check the lens and bridge for proper fitting.
S
M
L
1.
2.
3.
4.
5.
7.
8.
10.
6.
9.
