Bante932 Benchtop Water Hardness Meter
5
2.
Insert the BNC connector into the connector socket labeled pH/ISE. Rotate and push the connector clockwise until it locks. After the connection is
completed, DO NOT pull on the cable. Always make sure that the connector is clean and dry.
Connecting the Temperature Probe
1.
Place the temperature probe into the circular hole of the electrode arm.
2.
Insert the phone plug to the connector socket labeled ATC.
Connecting the Power Adapter
1.
Connect the USB cable to power adapter.
2.
Insert the other side of cable into the power socket. The meter is now ready for use.
