Banner U-Gage Ultrasonic Sensor Brochure Download Page 9

U-GAGE

®

Q45U: Push-button programming for versatility and ease of use.

U-GAGE

®

Q45U: Push-button programming for versatility and ease of use.

9

Simply push one button 

to set up operating window

limits from 100 mm to 1.4 m. Microprocessor-controlled,
TEACH-mode limits are set by simply placing the target at
one of the desired limits and clicking the push button,
then placing the target at the second limit and
clicking again.

Selectable response modes and times.

Q45U Sensors with discrete output are
programmable for either ON/OFF presence
detection or HIGH/LOW level control. ON/OFF
control mode energizes the solid-state,
normally-open (NO) or normally-closed (NC)
output when a target is detected within the
sensing window or when the target is outside
the sensing window. HIGH/LOW mode energizes
the output when the first window limit is reached, and the output stays
energized until the target reaches the second window limit, meeting the logic
needs for fill-level, web tensioning control and similar applications. Response
time is also programmable from 20 ms to 2.56 seconds, depending on
model, utilizing DIP switches (discrete models) or a potentiometer (analog
models) located beneath the sensor’s hinged, sealed polycarbonate cover.

Q45U Model  Selection

Superior diagnostics.

Three LEDs continuously display

programming and operating status by

indicating POWER ON, OUTPUT OPERATING,

and SIGNAL STRENGTH. A five-segment LED bar

graph also indicates the relative position of the target within
the sensing window.

FAR LIMIT

Push the Button

2 m (6.5')*

5-pin Mini-style QD**

5-pin Euro-style QD**

2 m (6.5')*

5-pin Mini-style QD**

5-pin Euro-style QD**

2 m (6.5')*

5-pin Mini-style QD**

5-pin Euro-style QD**

2 m (6.5')*

5-pin Mini-style QD**

5-pin Euro-style QD**

2 m (6.5')*

5-pin Mini-style QD**

5-pin Euro-style QD**

12 to 24V dc

12 to 24V dc

12 to 24V dc

15 to 24V dc

15 to 24V dc

No

Yes

Yes

Yes

Yes

Models  

Range 

Temperature 

Cable

Supply Voltage 

Output Type

Compensation

Q45UBB63DA

Q45UBB63DAQ

Q45UBB63DAQ6

Q45UBB63DAC

Q45UBB63DACQ

Q45UBB63DAQ6

Q45UBB63BC

Q45UBB63BCQ

Q45UBB63BCQ6

Q45ULIU64ACR

Q45ULIU64ACRQ

Q45ULIU64ACRQ6

Q45ULIU64BCR

Q45ULIU64BCRQ

Q45ULIU64BCRQ6

100 mm to 1.4 m

4" to 55"

100 mm to 1.4 m

4" to 55"

250 mm to 3 m

9.8" to 118"

100 mm to 1.4 m

4" to 55"

250 mm to 3 m

9.8" to 118"

Bipolar

NPN and PNP

0 to 10V dc

or

4 to 20 mA

(Selectable)

U p

t o

3 m

NEAR LIMIT

Push the Button

* 9 m (30') cables are available by adding suffix “w/30” to the model number of a cabled sensor (e.g., Q45UBB63DA w/30).

** A model with a quick-disconnect (QD) connector requires a mating cable, see page 15 for a partial listing of available cables.

Analog Output

Discrete Output

Summary of Contents for U-Gage Ultrasonic Sensor

















Reviews: