Dimensions
1517 mm
257 mm
360 mm
238 mm
16 mm
20 mm
520 mm
1020 mm
TC1
TC2
TC3
80mm
Assembly
The probe is assembled except for the two handles and handle caps, which ship in a separate bag (model ACC-BWA-TPROBE-HAN-
DLES). To attain the proper seal and protect the probe and sensors from the environment, wrap each pipe thread connection three or
four times with the PTFE tape before tightening the handles to the probe bracket assembly.
Warnings
The manufacturer does not take responsibility for the violation of any warning listed in this document. Make no modifications to this
product. Any modifications to this product not expressly approved by Banner Engineering could void the user’s authority to operate the
product. All specifications published in this document are subject to change. Banner reserves the right to modify product specifica-
tions or to update documentation at any time. For the most recent version of any documentation, refer to:
.
©
2006-2013 Banner Engineering Corp. All rights reserved.
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned
to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,
abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN-
CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND
WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL
BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN-
SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY
PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR-
RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or
liabilities relating to any product previously manufactured by Banner Engineering Corp.
SureCross Temperature Probe with DX80 Node
www.bannerengineering.com - tel: 763-544-3164
