Antenna Installation
Always install and properly ground a qualified surge suppressor when installing a remote antenna system. Remote antenna configura-
tions installed without surge suppressors invalidate the manufacturer's warranty.
Always keep the ground wire as short as possible and make all ground connections to a single-point ground system to ensure no ground
loops are created. No surge suppressor can absorb all lightning strikes. Do not touch the SureCross
™
device or any equipment connec-
ted to the SureCross device during a thunderstorm.
Mounting an RP-SMA Antenna Directly to the Cabinet
This antenna mounts directly to the outside of the box, with the SureCross device mounted inside the box.
1
3
4, 5
2
Model Number
Description
1
BWA-9O2-C
Antenna, Omni, 902-928 MHz, 2 dBd, Rubber Swivel, RP-SMA MALE
BWA-2O2-C
Antenna, Omni, 2.4 GHz, 2 dBd, Rubber Swivel, RP-SMA MALE
BWA-2O5-C
Antenna, Omni, 2.4 GHz, 5 dBd, Rubber Swivel, RP-SMA MALE
BWA-2O7-C
Antenna, Omni, 2.4 GHz, 7 dBd, Rubber Swivel, RP-SMA MALE
2
BWC-LMRSFRPB
Surge Suppressor, Bulkhead, RP-SMA Type, 900 MHz/2.4 GHz
3
BWC-1MRSFRSB02
RG58 Cable, RP-SMA TO RP-SMA Female Bulkhead, 0.2 m
BWC-1MRSFRSB1
RG58 Cable, RP-SMA TO RP-SMA Female Bulkhead, 1 m
BWC-1MRSFRSB2
RG58 Cable, RP-SMA TO RP-SMA Female Bulkhead, 2 m
BWC-1MRSFRSB4
RG58 Cable, RP-SMA TO RP-SMA Female, Bulkhead, 4 m
4
DIN-35-105
DIN Rail section, 105 mm long, 35 mm design
5
SMBDX80DIN
DIN Rail Bracket Assembly for DX70 and DX80 models.
Mounting an RP-SMA Antenna Remotely
This antenna mounts remotely from the box, with the SureCross device mounted inside the box.
SureCross Wireless I/O Network Manual
36
www.bannerengineering.com - tel: 763-544-3164
rev. I
