background image

Original Instructions
June 23, 2023

p/n: 233275 Rev. A

233275

R70SR SNAP SIGNAL™ Serial Data Radio





 

R70SR Features

Sure Cross® R70SR Serial Data Radios are compact, industrial, low-power wireless communications devices used to extend the range of 
serial communications networks. The Serial Data Radios are available in two frequencies, 900 MHz and 2.4GHz, and are fitted with M12 
quick disconnect connectors for fast deployment.

 For additional information, updated documentation, and a list of accessories, refer to Banner Engineering's web­
site, 

www.bannerengineering.com

.

 

 

RS­485 serial communication 
Star or tree network topology configuration 
DIP switches select operational modes 

Frequency Hopping Spread Spectrum (FHSS) technology ensures reliable data delivery

 

Self-healing, auto-routing radio frequency network with multiple hops to extend the network's 

range 

R70SR Models 

 Models 

 Frequency 

 Transmit Power 

 R70SR9MQ  

 900 MHz ISM Band 

 1 Watt 

 R70SR2MQ  

 2.4 GHz ISM Band 

 65 mW (100 mW EIRP) 

Quick Start Guide

Setting Up Your Data Radio Network 

To set up and install your wireless Data Radio network, follow these steps: 

Buttons and LEDs

Binding button, LEDs, and DIP switches

Binding button

LEDs

Before installing your data radios, verify that your serial devices work. Connect your serial devices using a serial cable. 

1. 

 Configure the DIP switches of all devices. 

2. 

Apply power to all devices. 

3. 

Form the wireless network by binding the repeater and peripheral radios to the controller/primary radio. 

4. 

Observe the LED behavior to verify the devices are communicating with each other. 

5. 

Install your wireless sensor network components. For more details about installing your radios, refer to the 

Sure Cross Installation 

Guide

 (p/n 151514) downloadable from the Wireless Reference Library at 

www.bannerengineering.com

6. 

© Banner Engineering Corp.

Summary of Contents for Sure Cross R70SR Series















Reviews: