manualshive.com logo in svg

Banner Sure Cross DXM700-B Series, Instruction Manual

Share
Download
Banner Sure Cross DXM700-B Series Instruction Manual Download Page 36

6 LCD and Menu System

The LCD has four user-defined LED indicators, four control buttons, and an LCD display. The four buttons control the menu

system on the LCD menu.

Banner Eng

08:25:45

→

Registers

→

Push

S

→

08:25:15 

→

ISM Radio

→

System Config

→

System Info

↑

↓

ENTER

BACK

→

I/O Board

The top-level menu always displays the time in a 24-hour format.

• The up and down arrows scroll through display items.
• The enter button selects the highlighted items on the display
• The back button returns to a previous menu option.

The left display column shows an arrow at the beginning of the line if the

menu has submenus. The right column shows a vertical line with an

arrow at the bottom if the user can scroll down to see more menu items.

The DXM700 can be configured to require a passcode be entered before the LCD and Menu system will operate. The

passcode configuration is defined in the DXM Configuration Tool.

6.1 Registers

The Registers submenu displays the processor's local registers that can be configured using the DXM Configuration Tool.
To configure these local registers, launch the DXM Configuration Tool. Go to Local Registers and expand the view for a

local register by clicking on the down arrow next to the register number. In the LCD Permissions field, select None, Read,

Write, or Read/Write.

Registers

List of Local Register
Values and the Register Name

to change the value

to accept

ENTER

BACK

to return to the previous menu

↑ ↓

Read allows the register to be displayed, and Write or Read/Write allows the register value to be changed using the LCD.

The Units and Scaling parameters are optional and affect the LCD.

6.2 Push

The Push menu displays information about the last data sent to the Webserver.

Push

Trigger Data Push

Trigger Data Push

to change the value

to accept

ENTER

BACK

to return to the previous menu

↑ ↓

Status
Time (hh:mm:ss)

The user can force an immediate push to the webserver using Trigger Push. If a current push is in process it may take

several minutes to complete over cellular.

• The Trigger Push submenu forces an immediate push to the web server.
• The status and time fields indicate success or failure of the last attempted push and time of the last attempted push.

Sure Cross

®

 DXM700-Bx Wireless Controller

 

 

36

www.bannerengineering.com - Tel: + 1 888 373 6767

 

Summary of Contents for Sure Cross DXM700-B Series































































Reviews:

No comments

Brands by name

Popular brands

Load more brands