Banner Q4X Series Page 18 Instruction Manual Download

Page: 18 / 46

Action

Result

Pulses

TEACH Mode

Two-point static background
suppression

Dynamic background suppression

One-point window (foreground
suppression)

One-point background suppression

Dual (int distance)

The selected TEACH method displays for a
few seconds and the sensor returns to Run
mode.

3.4.2 Reset to Factory Defaults Using the Remote Input

Eight-pulse the remote input to apply the factory defaults and return to Run mode.

Note:

The input wire function remains at remote teach input (

3.5 Locking and Unlocking the Sensor Buttons

Use the lock and unlock feature to prevent unauthorized or accidental programming changes. Three settings are available:

•

—The sensor is unlocked and all settings can be

modified

(default).

•

— The sensor is locked and no changes can be made.

•

—The switch point value can be changed by teaching or manual adjustment, but no sensor settings can be

changed through the menu.

Note:

When the sensor is in either

mode, the active channel can be changed using

(+)(CH1/CH2)

When in

mode,

displays when the

(SELECT)(TEACH)

button is pressed. The switch point displays when

(+)(CH1/

CH2)

(-)(MODE)

are pressed, but

displays if the buttons are pressed and held.

When in

mode,

displays when

(-)(MODE)

is pressed and held. To access the manual adjust options,

briefly

press

and release

(+)(CH1/CH2)

(-)(MODE)

. To enter TEACH mode, press the

(SELECT)(TEACH)

button and hold for longer than 2

seconds.

Button Instructions

To enter

mode, hold

and press

four times. To enter

mode, hold

and press

seven times. Holding

and pressing

four times unlocks the sensor from either lock mode and the sensor displays

Remote Input Instructions

1. Access the remote input.

Q4X Stainless Steel Laser Sensor with Dual Discrete Outputs and IO-Link

www.bannerengineering.com - Tel: 763.544.3164

Summary of Contents for Q4X Series















































Search results

Summary of Contents for Q4X Series

Reviews:

Related manuals for Q4X Series

Brands by name

Popular brands

Banner Q4X Series, Instruction Manual

Search results

Summary of Contents for Q4X Series

Reviews:

Related manuals for Q4X Series

Brands by name

Popular brands