7 Checkout Procedure Schedule
This section lists the schedule of checkout procedures and describes where each procedure is documented. Checkouts
must be performed as described. Results should be recorded and kept in the appropriate place (for example, near the
machine, and/or in a technical file).
7.1 Schedule of Checkouts
Checkout cards and this manual can be downloaded at
Banner Website.
Checkout
Procedure
When to Perform
Where to Find the Procedure
Who Must Perform
the Procedure
Trip Test
•
At Installation
•
Any time the System, the guarded
machine, or any part of the application
is altered.
Trip Test
on page 28
Qualified Person
Commissioning
Checkout
•
At Installation
•
Whenever changes are made to the
System (for example, either a new
configuration of the EZ-SCREEN Type 2
or changes to the guarded machine).
Commissioning Checkout
on page 33
Qualified Person
Shift/Daily Checkout
•
At each shift change
•
Machine setup change
•
Whenever the System is powered up
During continuous machine run periods, this
checkout should be performed at intervals not to
exceed 24 hours.
Daily Checkout Card (Banner p/n 122450)
A copy of the checkout results should be recorded
and kept in the appropriate place (for example,
near or on the machine, in the machine's technical
file).
Designated Person or
Qualified Person
Semi-Annual
Checkout
Every six months following System installation, or
whenever changes are made to the System
(either a new configuration of the EZ-SCREEN
Type 2 or changes to the machine).
Semi-Annual Checkout Card (Banner p/n
122451)
A copy of the checkout results should be recorded
and kept in the appropriate place (for example,
near or on the machine, in the machine's technical
file).
Qualified Person
EZ-SCREEN
®
Type 2 Light Screen
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
