Banner EZ-SCREEN SLS, Instruction Manual

Page: 77 / 114

May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
77
•
•
•
Machine
Control
Machine
Control
Machine
Control
Emitters Receivers Emitters Receivers Emitters Receivers
Machine
Control
Machine
Control
Machine
Control
Emitters Receivers Emitters Receivers Emitters Receivers
EZ-SCREEN
Position #3
40 + 2 + 2 = 44
Individual Response
EZ-SCREEN
Position #2
15 + 2 = 17
Individual Response
EZ-SCREEN
Position #1
Individual Response
EZ-SCREEN
Position #3
15 + 2 + 2 = 19
Individual Response
EZ-SCREEN
Position #2
40 + 2 = 42
Individual Response
EZ-SCREEN
Position #2
15 + 2 = 17
Individual Response
EZ-SCREEN
Position #3
15 + 2 + 2 = 19
Individual Response
EZ-SCREEN
Position #1
Individual Response EZ-SCREEN
Position #1
Individual Response
Setting cascaded sensors for scan code, trip or latch output, external device monitoring (EDM), reduced resolution, fixed
blanking and inverted display is identical to the procedure for non-cascadeable emitters and receivers (see " Operating In-
structions " on page 53 ).
Scan codes for each emitter and receiver pair must match. However, for cascaded installations, scan codes must alternate
on adjacent systems as described in " Installation of Multiple Systems " on page 30 .
WARNING:
Use a scan code
If you do not use a scan code, a receiver can synchronize to the signal from the wrong emitter, re-
ducing the safety function of the light curtain and creating an unsafe condition that could result in
serious injury or death.
Configure adjacent systems to use different scan codes (for example, set one system to use scan
code 1 and the other system to use scan code 2). Perform a trip test to confirm the light curtain
function.
While the scan code, reduced resolution, fixed blanking, and inverted display settings are independent for each cascaded
sensor pair, the trip/latch mode and EDM settings must be determined by the first receiver in the cascade (closest to the ma-
Cascaded Sensor Configuration Settings
8.6
© Banner Engineering Corp.