background image

Datasheet

The Sure Cross

®

 K70 Wireless Indicator Light combines the best of Banner's popular Indicator Light family with its reliable, field-

proven, Sure Cross wireless architecture.

Available in 900 MHz and 2.4 GHz ISM Bands

Up to five colors in one device

Rugged, water-resistant IP65 housing with UV-stabilized material

Bright, uniform indicator segments appear gray when off to eliminate false indication

from ambient light

Two-way communication - lights can be controlled with the input wires or the master

radio

Input wires can be configured as auxiliary sourcing inputs from external devices or as

a 20 Hz, 32-bit event counter

Important: Please download the complete K70 Wireless Indicator Light technical documentation, available in
multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings,
and installation instructions of this device.

Important: Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los K70
Wireless Indicator Light, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones,
advertencias, y las instrucciones de instalación de estos dispositivos.

Important: Veuillez télécharger la documentation technique complète des K70 Wireless Indicator Light sur notre
site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes de
sécurité et les instructions de montage.

Models

900 MHz Models

Model

No. of Colors

Colors

Connection

K70DXN9RQ

1

Red

Integral 5-pin M12/Euro-style male quick
disconnect

K70DXN9GRQ

2

Green, Red

K70DXN9GYRQ

3

Green, Yellow, Red

K70DXN9BGYRQ

4

Blue, Green, Yellow, Red

Integral 8-pin M12/Euro-style male quick
disconnect

K70DXN9WBGYRQ

5

White, Blue, Green, Yellow, Red

2.4 GHz Models

Model

No. of Colors

Colors

Connection

K70DXN2RQ

1

Red

Integral 5-pin M12/Euro-style male quick
disconnect

K70DXN2GRQ

2

Green, Red

K70DXN2GYRQ

3

Green, Yellow, Red

K70DXN2BGYRQ

4

Blue, Green, Yellow, Red

Integral 8-pin M12/Euro-style male quick
disconnect

K70DXN2WBGYRQ

5

White, Blue, Green, Yellow, Red

Integral quick disconnect models are listed; a mating corset is required (see 

Accessories 

on p. 8).

To order the 150mm (5.9 in) PVC pigtail with quick disconnect model, replace the Q with QP in the model number, for

example K70DXN9RQP.

To order the 2 m (6.5 ft) cable models, omit the suffix Q in the model number, for example K70DXN9R.

EZ-LIGHT

®

 K70 Wireless Indicator Light

 

 

Original Document

192534 Rev. D

8 November 2019

192534

Summary of Contents for EZ-LIGHT K70 Series












Reviews: