Emergency Stop Safety Module
Model ES-GA-5A
for 24V dc/115V ac operation;
Model ES-HA-5A
for 24V dc /230V ac operation
WARNING . . .
This Emergency Stop Safety Module is not a point-of-operation guarding device, as
defined by OSHA regulations.
It is necessary to install point-of-operation guarding devices, such as safety
light curtains and/or hard guards, to protect personnel from hazardous machinery.
Failure to install point-of-
operation guards on hazardous machinery can result in a dangerous condition which could lead to serious
injury or death.
!
• Monitors one dual-channel normally-closed emergency stop switch circuit for a
contact failure or wiring fault
• Input monitoring circuit uses a diverse-redundant design
• Four output switching channels for connection to control-reliable power
interrupt circuits
• Auto reset or monitored manual reset
• Auxiliary non-safety outputs for status monitoring by process controller: one
electromechanical “hard” contact, plus two solid-state outputs
• Design complies with standards UL991, EN 418, and EN 954-1
(Safety Category 4)
• For use in functional stop category 0 applications per NFPA 79
and EN 418
• 5 amp safety output contacts
• Plug-in terminal blocks
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
