Figure 2. DEK100 internal layout
2.3 Install and Wire the Solar Panel
1. Install the solar panel's bracket.
Figure 3. Solar panel bracket installation
a) Open the packaging for the five-watt solar panel and assemble the aluminum mounting cleat with the arc facing
out. (Convex orientation)
b) Leave the hardware a little loose so that the bracket can slide onto the panel frame between the mating surfaces.
c) Move the cleat to the center of the panel and tighten the hardware to secure it. See the included manufacturer
documentation for further instruction.
2. Connect the solar cable to the panel.
DXM Enclosure Kit (DEK) Series
www.bannerengineering.com - Tel: + 1 888 373 6767
5
