14
X. Do’s and Don’ts...
•
Read the instruction manual before operating your laminator.
•
Always run test samples before laminating valuable items.
•
Feed the print through slowly and evenly, smoothing it as it is pulled into the
•
laminator.
•
Operate the laminator with two rolls of the same width laminating film to avoid
excessive adhesive transfer to the rollers.
•
If laminator is not in current use, lower the heat setting or turn unit off.
•
Never feed abrasive materials or metal objects such as staples, paper clips, or
glitter
•
through the laminator. Keep sharp objects like scissors and rulers away from the
rollers at all times.
•
Once an item has been fed between the rollers do not attempt to alter its position
as this can damage the print.
•
Do not stop the laminator before the item has completely exited from the rear to
avoid a “dwell line” across the print.
•
Do not clean or service the laminator before disconnecting the power supply.
XI. Warranty & Return Policy...
Warranty:
Your ValueLam 4500 is warranted to be free of defects in material and workmanship for a
period of 1 year from the date of original purchase. In the event of a defect in materials or
workmanship, Banner American Products, Inc. will, at their option, repair or replace the
laminator.
Banner American Products, Inc. makes no other warranty stated or implied except as stated
above. This warranty does not cover damage to the machine that occurs as a result of misuse
or improper handling, or damage to prints.
Return Policy:
If your laminator is not operating properly, first review the Operating Instructions and the
troubleshooting guide. If the malfunction cannot be corrected, contact Banner American for
instructions. Be sure to have your machine serial number and date of purchase handy.
If the laminator must be returned to the dealer, it is your responsibility to ensure that it is
packaged properly. Shipping damage as a result of improper packaging is not covered under
the terms of this warranty.
