32
97654 v.7
3.
Select "
ADD BIDs
."
See
Figure 6-2.
Alternatively, you can select "
ADD
ALL BIDs
" to record all available
parameters. See
Figure 6-2, A.
4.
Select a “
GROUP
” parameter.
5.
Select one or more “
ITEM
”
parameters to record.
The parameter
will be highlighted if selected.
See
Figure 6-3.
6.
Press
BACK
to return to the
"
GROUP
" menu and select more
parameters from another group if
desired.
7.
Return to the "
Datalog
" menu.
The screen will list all the highlighted
parameters to be recorded.
See
Figure 6-2, A.
8.
Once the parameter list for data
logging is as desired, return to the
Gauge Screen
.
6.2 Start/Stop Data Log
A Micro SD card must be
inserted into the card slot on the front
face of the iDash 1.8 in order for data
logging to begin. Each time a data log
is stopped, a new .CSV file containing
the recorded data will be saved onto
the Micro SD card.
6.2.1 Data Logging (Shortcut)
1.
While viewing the
Gauge Screen
hold the
DOWN
button for 2 seconds
to start a new data log.
A banner will
appear stating "
Start Data Logging:
Log###.csv
" once started.
2.
To then stop the data log, while
viewing the
Gauge Screen
hold
the
DOWN
button for 2 seconds. A
banner will appear stating "
Stop Data
Logging: Log###.csv
" once stopped.
6.2.2 Data Logging (Menu
Selection Method)
1.
Select
"Data Logging"
from the
main "
MENU
."
2.
Select
"Start Data Log"
to start
recording parameters (See
Figure
6-1
). A banner will appear stating
"
Start Data Logging: Log###.csv
"
once started.
If no card is inserted, the
device will display "
SD card is Not
Ready."
3.
On the "
LOGGING
" menu screen,
select "
Stop Data Log
."
A banner will
appear stating "
Stop Data Logging:
Log###.csv
" once stopped.
6.3 Auto-Log Feature
When enabled, this feature will
automatically start data logging at
vehicle startup. After this first log, data
logging will need to be activated as
stated in
"6.2 Start/Stop Data Log"
.
DATA LOGGING
(IF EQUIPPED),
CONTINUED
Figure 6-3
Figure 6-4
Summary of Contents for iDash 1.8
Page 3: ...97654 v 7 3...
