97674 v.1
3
If installing multiple iDash 1.8”.
A.
Remove any extra terminators.
Only one is needed for all iDash 1.8”
connected.
See Figure 5, Step 6A
.
B.
Use Y- Cable(s) to connect all the
iDash 1.8”.
See Figure 5, Step 6B
.
Refer to the iDash 1.8” Installation
manual for more detailed
instructions on iDash 1.8” install.
Secondary Secondary
Primary
Terminator
Jumper
(HW Rev 2 only)
Y-Cable
OBD-II CONNECTION DETERMINES
PRIMARY iDASH.
Step
A
Step
B
Figure 3
iDash Button Function
SixGun and EconoMind Setup
To load the Tuner layout navigate to:
• Menu -> Gauge Layout -> Tuner
-> *Select*
To change power level:
•
Press the up or down arrow.
PRESS
to decrease power level.
PRESS
to increase power level.
% Power
Added
SELECT
button
Hold to... :
- Save and return
to Gauge Screen
UP
button
Hold to... :
- Rapid scroll
(Value Selection)
DOWN
button
Hold to... :
- Rapid scroll
(Value Selection)
- Start/Stop
(Datalog Mode)
BACK
button
Press to... :
- Create Laps/
Markers
(Data Log Mode)
Hold to... :
- Return to Gauge
Screen