2
97674 v.1
6-Pin OR 8-Pin
Connector to
Banks Bus 1
Products
OBD-II
Connector
Figure 2
Figure 1
*Only on Ford 6.0
*Remove Only
if replacing
iDash/IQ 4.3”
or 5.0”
Fuse Tap
Connection
to Fuse #22
4-pin
Connector
to iDash 1.8
Banks Bus 1
For iDash 4.3/5.0 replacement only:
1.
Uninstall the Banks IQ, Banks Bridge
Module, and the OBD-II cable (for the
Banks IQ Bridge Interface).
See Figure 1 & 2
.
For all installations:
2.
Connect the OBD-II Cable for the
iDash 1.8” (
see Figure 2
) to your
vehicle’s OBD-II port.
3.
Connect the 6-Pin/8-Pin (Application
Dependant) of the OBD-II Cable to the
Power Tuner/ SpeedBrake.
4.
Connect the 4-Pin connector of the
OBD-II Cable to the iDash 1.8”
(See Figure 2)
.
Ford 6.0 Power Stroke Applications
For any OBD-II Cable for the Ford 6.0L
(
See Figure 4
), a connection has to
be made to the fuse panel (
Fuse #22
)
using a fuse tap.
•
Remove the Panel to reveal the fuse
panel below the steering wheel and
remove
Fuse #22
.
See Figure 4
.
•
Apply the provided fuse tap before
reinstalling.
See Figure 5
•
Route the female terminator
connector to the fuse tap.
See Figure 5
Figure 5
Figure 4
*REMOVE